[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) [ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6f5000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6f5000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128736) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128736 [ 0.000000] HighMem 128736 -> 128736 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128736 [ 0.000000] On node 0 totalpages: 128736 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123667 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6B90 checksum 0 [ 0.000000] ACPI: RSDP 000F6B90, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1F6E7352, 005C (r1 IBM TP-70 1290 LTP 0) [ 0.000000] ACPI: FACP 1F6E7400, 00F4 (r3 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 1F6E75E7, D7A8 (r1 IBM TP-70 1290 MSFT 100000E) [ 0.000000] ACPI: FACS 1F6F6000, 0040 [ 0.000000] ACPI: SSDT 1F6E75B4, 0033 (r1 IBM TP-70 1290 MSFT 100000E) [ 0.000000] ACPI: ECDT 1F6F4D8F, 0052 (r1 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI: TCPA 1F6F4DE1, 0032 (r1 IBM TP-70 1290 PTL 1) [ 0.000000] ACPI: APIC 1F6F4E13, 005A (r1 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI: MCFG 1F6F4E6D, 003E (r1 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI: BOOT 1F6F4FD8, 0028 (r1 IBM TP-70 1290 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) [ 0.000000] Built 1 zonelists. Total pages: 127731 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 798.046 MHz processor. [ 30.493695] Console: colour VGA+ 80x25 [ 30.493941] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 30.494314] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 30.518741] Memory: 498828k/514944k available (2015k kernel code, 15612k reserved, 916k data, 364k init, 0k highmem) [ 30.518760] virtual kernel memory layout: [ 30.518763] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 30.518766] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 30.518769] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 30.518771] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) [ 30.518774] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 30.518777] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 30.518780] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 30.518787] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 30.518855] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 30.598876] Calibrating delay using timer specific routine.. 1598.05 BogoMIPS (lpj=3196103) [ 30.598918] Security Framework v1.0.0 initialized [ 30.598928] SELinux: Disabled at boot. [ 30.598954] Mount-cache hash table entries: 512 [ 30.599167] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 30.599189] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.599194] CPU: L2 cache: 2048K [ 30.599200] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 30.599217] Compat vDSO mapped to ffffe000. [ 30.599237] Checking 'hlt' instruction... OK. [ 30.615062] SMP alternatives: switching to UP code [ 30.615366] Freeing SMP alternatives: 11k freed [ 30.615861] Early unpacking initramfs... done [ 31.361356] ACPI: Core revision 20070126 [ 31.361574] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 31.384255] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 31.384297] Total of 1 processors activated (1598.05 BogoMIPS). [ 31.384494] ENABLING IO-APIC IRQs [ 31.384721] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 31.530849] Brought up 1 CPUs [ 31.531026] Booting paravirtualized kernel on bare hardware [ 31.531113] Time: 11:19:30 Date: 10/17/107 [ 31.531147] NET: Registered protocol family 16 [ 31.531271] EISA bus registered [ 31.531290] ACPI: bus type pci registered [ 31.531469] PCI: PCI BIOS revision 2.10 entry at 0xfd8d9, last bus=7 [ 31.531473] PCI: Using configuration type 1 [ 31.531477] Setting up standard PCI resources [ 31.537848] ACPI: EC: Found ECDT [ 31.554669] ACPI: Interpreter enabled [ 31.554675] ACPI: (supports S0 S3 S4 S5) [ 31.554708] ACPI: Using IOAPIC for interrupt routing [ 31.570783] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 31.570876] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.570888] PCI: Probing PCI hardware (bus 00) [ 31.571756] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 31.571764] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 31.572504] PCI: Transparent bridge - 0000:00:1e.0 [ 31.572667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.573033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 31.573307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 31.573586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 31.580818] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 31.581262] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 31.581702] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 31.582139] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 31.582576] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 31.583057] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 31.583496] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 31.583934] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 31.584462] ACPI: Power Resource [PUBS] (on) [ 31.584489] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.584504] pnp: PnP ACPI init [ 31.584519] ACPI: bus type pnp registered [ 31.591950] pnp: PnP ACPI: found 14 devices [ 31.591955] ACPI: ACPI bus type pnp unregistered [ 31.591961] PnPBIOS: Disabled by ACPI PNP [ 31.592039] PCI: Using ACPI for IRQ routing [ 31.592044] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.611797] NET: Registered protocol family 8 [ 31.611801] NET: Registered protocol family 20 [ 31.611886] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 31.611893] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 31.611900] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 31.611906] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 31.611918] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 31.611925] pnp: 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved [ 31.611932] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 31.611939] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 31.614787] Time: tsc clocksource has been installed. [ 31.642474] PCI: Bridge: 0000:00:1c.0 [ 31.642478] IO window: disabled. [ 31.642487] MEM window: 90100000-901fffff [ 31.642493] PREFETCH window: disabled. [ 31.642501] PCI: Bridge: 0000:00:1c.2 [ 31.642507] IO window: 3000-3fff [ 31.642515] MEM window: 90200000-902fffff [ 31.642523] PREFETCH window: c0000000-c00fffff [ 31.642535] PCI: Bus 5, cardbus bridge: 0000:04:00.0 [ 31.642540] IO window: 00004000-000040ff [ 31.642548] IO window: 00004400-000044ff [ 31.642556] PREFETCH window: c8000000-cbffffff [ 31.642564] MEM window: 94000000-97ffffff [ 31.642572] PCI: Bridge: 0000:00:1e.0 [ 31.642577] IO window: 4000-7fff [ 31.642585] MEM window: 90300000-9fffffff [ 31.642593] PREFETCH window: c8000000-cfffffff [ 31.642630] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 31.642641] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 31.642670] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 17 [ 31.642679] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 31.642697] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 31.642720] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 31.642744] NET: Registered protocol family 2 [ 31.678823] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 31.678876] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 31.679159] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 31.679355] TCP: Hash tables configured (established 16384 bind 16384) [ 31.679360] TCP reno registered [ 31.690988] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 32.398877] it is [ 33.149560] Freeing initrd memory: 7305k freed [ 33.149739] Simple Boot Flag at 0x35 set to 0x1 [ 33.150138] audit: initializing netlink socket (disabled) [ 33.150158] audit(1195298370.484:1): initialized [ 33.153857] VFS: Disk quotas dquot_6.5.1 [ 33.153949] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 33.154105] io scheduler noop registered [ 33.154110] io scheduler anticipatory registered [ 33.154114] io scheduler deadline registered [ 33.154144] io scheduler cfq registered (default) [ 33.154166] Boot video device is 0000:00:02.0 [ 33.154396] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 33.154459] assign_interrupt_mode Found MSI capability [ 33.154466] Allocate Port Service[0000:00:1c.0:pcie00] [ 33.154543] Allocate Port Service[0000:00:1c.0:pcie02] [ 33.154684] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 33.154746] assign_interrupt_mode Found MSI capability [ 33.154752] Allocate Port Service[0000:00:1c.2:pcie00] [ 33.154810] Allocate Port Service[0000:00:1c.2:pcie02] [ 33.155042] isapnp: Scanning for PnP cards... [ 33.509765] isapnp: No Plug & Play device found [ 33.551649] Real Time Clock Driver v1.12ac [ 33.551830] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 33.553715] pnp: Device 00:0a activated. [ 33.553934] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 33.554290] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 [ 33.554303] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 33.555296] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 33.555639] input: Macintosh mouse button emulation as /class/input/input0 [ 33.555787] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 33.563920] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 33.563930] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 33.564200] mice: PS/2 mouse device common for all mice [ 33.564381] EISA: Probing bus 0 at eisa.0 [ 33.564393] Cannot allocate resource for EISA slot 1 [ 33.564398] Cannot allocate resource for EISA slot 2 [ 33.564403] Cannot allocate resource for EISA slot 3 [ 33.564408] Cannot allocate resource for EISA slot 4 [ 33.564412] Cannot allocate resource for EISA slot 5 [ 33.564417] Cannot allocate resource for EISA slot 6 [ 33.564422] Cannot allocate resource for EISA slot 7 [ 33.564432] EISA: Detected 0 cards. [ 33.564593] TCP cubic registered [ 33.564617] NET: Registered protocol family 1 [ 33.564656] Using IPI No-Shortcut mode [ 33.564933] Magic number: 15:743:327 [ 33.565363] Freeing unused kernel memory: 364k freed [ 33.602495] input: AT Translated Set 2 keyboard as /class/input/input1 [ 34.942774] AppArmor: AppArmor initialized<5>audit(1195298371.984:2): type=1505 info="AppArmor initialized" pid=1208 [ 34.958521] fuse init (API version 7.8) [ 34.968450] Failure registering capabilities with primary security module. [ 34.990756] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 34.990768] ACPI: Processor [CPU] (supports 8 throttling states) [ 34.993653] ACPI: Thermal Zone [THM0] (44 C) [ 35.813226] usbcore: registered new interface driver usbfs [ 35.813264] usbcore: registered new interface driver hub [ 35.813306] usbcore: registered new device driver usb [ 35.814804] USB Universal Host Controller Interface driver v3.0 [ 35.814887] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 35.814903] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 35.814911] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 35.815131] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 35.815171] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820 [ 35.815360] usb usb1: configuration #1 chosen from 1 choice [ 35.815413] hub 1-0:1.0: USB hub found [ 35.815423] hub 1-0:1.0: 2 ports detected [ 35.918265] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 20 [ 35.918284] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 35.918291] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 35.918330] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 35.918369] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 35.918533] usb usb2: configuration #1 chosen from 1 choice [ 35.918584] hub 2-0:1.0: USB hub found [ 35.918594] hub 2-0:1.0: 2 ports detected [ 36.022252] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 36.022271] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 36.022278] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.022320] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 36.022360] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 [ 36.022533] usb usb3: configuration #1 chosen from 1 choice [ 36.022588] hub 3-0:1.0: USB hub found [ 36.022599] hub 3-0:1.0: 2 ports detected [ 36.083715] SCSI subsystem initialized [ 36.094235] libata version 2.21 loaded. [ 36.126249] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 22 [ 36.126268] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 36.126275] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 36.126322] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 36.126360] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880 [ 36.126529] usb usb4: configuration #1 chosen from 1 choice [ 36.126578] hub 4-0:1.0: USB hub found [ 36.126588] hub 4-0:1.0: 2 ports detected [ 36.231578] tg3.c:v3.77 (May 31, 2007) [ 36.231608] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 36.231628] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 36.274167] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:b4:1c:b0 [ 36.274182] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 36.274188] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 36.274785] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 22 [ 36.274801] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 36.274809] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 36.274857] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 36.274904] ehci_hcd 0000:00:1d.7: debug port 1 [ 36.274914] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 36.274926] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x90040000 [ 36.357280] Floppy drive(s): fd0 is 1.44M [ 36.382008] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 36.382030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.382211] usb usb5: configuration #1 chosen from 1 choice [ 36.382262] hub 5-0:1.0: USB hub found [ 36.382274] hub 5-0:1.0: 8 ports detected [ 36.438770] FDC 0 is a National Semiconductor PC87306 [ 36.491142] ahci 0000:00:1f.2: version 2.2 [ 36.491180] ahci: probe of 0000:00:1f.2 failed with error -22 [ 36.496148] ata_piix 0000:00:1f.2: version 2.11 [ 36.496157] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 5.960000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.964000] Time: acpi_pm clocksource has been installed. [ 6.020000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 6.020000] scsi0 : ata_piix [ 6.020000] scsi1 : ata_piix [ 6.020000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 6.020000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 6.664000] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 6.832000] usb 3-1: configuration #1 chosen from 1 choice [ 7.072000] usb 3-2: new full speed USB device using uhci_hcd and address 4 [ 7.248000] usb 3-2: configuration #1 chosen from 1 choice [ 11.060000] ata1: port is slow to respond, please be patient (Status 0x80) [ 16.044000] ata1: device not ready (errno=-16), forcing hardreset [ 16.532000] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0201, max UDMA/33 [ 16.704000] ata2.00: configured for UDMA/33 [ 16.708000] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0201 PQ: 0 ANSI: 5 [ 16.724000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 16.724000] Uniform CD-ROM driver Revision: 3.20 [ 16.724000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 16.732000] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 20.180000] end_request: I/O error, dev fd0, sector 0 [ 33.244000] end_request: I/O error, dev fd0, sector 0 [ 33.244000] Buffer I/O error on device fd0, logical block 0 [ 46.308000] end_request: I/O error, dev fd0, sector 0 [ 46.308000] Buffer I/O error on device fd0, logical block 0 [ 60.388000] end_request: I/O error, dev fd0, sector 0 [ 73.452000] end_request: I/O error, dev fd0, sector 0 [ 73.452000] Buffer I/O error on device fd0, logical block 0 [ 86.516000] end_request: I/O error, dev fd0, sector 0 [ 86.516000] Buffer I/O error on device fd0, logical block 0 [ 89.476000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 89.564000] ISO 9660 Extensions: RRIP_1991A [ 89.892000] Registering unionfs 1.4 [ 89.892000] unionfs: debugging is not enabled [ 89.912000] loop: module loaded [ 90.164000] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 178.384000] Linux agpgart interface v0.102 (c) Dave Jones [ 178.464000] agpgart: Detected an Intel 915GM Chipset. [ 178.468000] agpgart: Detected 7932K stolen memory. [ 178.484000] agpgart: AGP aperture is 256M @ 0xb0000000 [ 178.676000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 179.096000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 180.388000] iTCO_vendor_support: vendor-support=0 [ 180.392000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 180.396000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 180.400000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 180.548000] intel_rng: FWH not detected [ 181.224000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 181.224000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 181.264000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 181.500000] Bluetooth: Core ver 2.11 [ 181.500000] NET: Registered protocol family 31 [ 181.500000] Bluetooth: HCI device and connection manager initialized [ 181.500000] Bluetooth: HCI socket layer initialized [ 182.112000] Bluetooth: HCI USB driver ver 2.9 [ 182.112000] usbcore: registered new interface driver hci_usb [ 182.148000] input: PC Speaker as /class/input/input3 [ 182.160000] parport_pc 00:0b: reported by Plug and Play ACPI [ 182.160000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 182.652000] irda_init() [ 182.652000] NET: Registered protocol family 23 [ 182.752000] Yenta: CardBus bridge found at 0000:04:00.0 [1014:0528] [ 182.752000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 182.752000] Yenta: Routing CardBus interrupts to PCI [ 182.752000] Yenta TI: socket 0000:04:00.0, mfunc 0x01d21002, devctl 0x64 [ 182.820000] ieee80211_crypt: registered algorithm 'NULL' [ 182.824000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 182.824000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 182.896000] pnp: Device 00:0c activated. [ 182.896000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 182.896000] nsc-ircc, chip->init [ 182.896000] nsc-ircc, Found chip at base=0x02e [ 182.896000] nsc-ircc, driver loaded (Dag Brattli) [ 182.896000] IrDA: Registered device irda0 [ 182.896000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 182.964000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 182.964000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 182.984000] Yenta: ISA IRQ mask 0x0c30, PCI irq 18 [ 182.984000] Socket status: 30000007 [ 182.984000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff [ 182.984000] cs: IO port probe 0x4000-0x7fff: clean. [ 182.984000] pcmcia: parent PCI bridge Memory window: 0x90300000 - 0x9fffffff [ 182.984000] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff [ 183.000000] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 183.000000] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 184.372000] cs: IO port probe 0x100-0x3af: clean. [ 184.372000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 184.372000] cs: IO port probe 0x820-0x8ff: clean. [ 184.372000] cs: IO port probe 0xc00-0xcf7: clean. [ 184.376000] cs: IO port probe 0xa00-0xaff: clean. [ 184.520000] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) [ 184.520000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 17 [ 184.520000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 185.448000] intel8x0_measure_ac97_clock: measured 55378 usecs [ 185.448000] intel8x0: clocking to 48000 [ 186.128000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 186.320000] input: TPPS/2 IBM TrackPoint as /class/input/input4 [ 191.132000] ACPI: AC Adapter [AC] (off-line) [ 191.236000] ACPI: Battery Slot [BAT0] (battery present) [ 191.312000] ACPI: ACPI Dock Station Driver [ 191.316000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 191.316000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 191.316000] ACPI: Error installing bay notify handler [ 191.316000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 191.452000] input: Power Button (FF) as /class/input/input5 [ 191.452000] ACPI: Power Button (FF) [PWRF] [ 191.500000] input: Lid Switch as /class/input/input6 [ 191.500000] ACPI: Lid Switch [LID] [ 191.524000] input: Sleep Button (CM) as /class/input/input7 [ 191.524000] ACPI: Sleep Button (CM) [SLPB] [ 191.888000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 193.008000] Clocksource tsc unstable (delta = 202297547 ns) [ 197.176000] lp0: using parport0 (interrupt-driven). [ 197.784000] ppdev: user-space parallel port driver [ 199.812000] IBM machine detected. Enabling interrupts during APM calls. [ 199.812000] apm: BIOS not found. [ 200.436000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 200.436000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 200.436000] thinkpad_acpi: ThinkPad EC firmware 70HT26WW-1.03 [ 200.440000] thinkpad_acpi: another device driver is already handling bay events [ 200.440000] thinkpad_acpi: disabling subdriver bay [ 200.440000] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode [ 200.520000] Failure registering capabilities with primary security module. [ 201.392000] Bluetooth: L2CAP ver 2.8 [ 201.392000] Bluetooth: L2CAP socket layer initialized [ 201.652000] Bluetooth: RFCOMM socket layer initialized [ 201.652000] Bluetooth: RFCOMM TTY layer initialized [ 201.652000] Bluetooth: RFCOMM ver 1.8 [ 210.352000] [drm] Initialized drm 1.1.0 20060810 [ 210.396000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 210.400000] [drm] Initialized i915 1.6.0 20060119 on minor 0