[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) [ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6f5000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6f5000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128736) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128736 [ 0.000000] HighMem 128736 -> 128736 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128736 [ 0.000000] On node 0 totalpages: 128736 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123667 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6B90 checksum 0 [ 0.000000] ACPI: RSDP 000F6B90, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1F6E7352, 005C (r1 IBM TP-70 1290 LTP 0) [ 0.000000] ACPI: FACP 1F6E7400, 00F4 (r3 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 1F6E75E7, D7A8 (r1 IBM TP-70 1290 MSFT 100000E) [ 0.000000] ACPI: FACS 1F6F6000, 0040 [ 0.000000] ACPI: SSDT 1F6E75B4, 0033 (r1 IBM TP-70 1290 MSFT 100000E) [ 0.000000] ACPI: ECDT 1F6F4D8F, 0052 (r1 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI: TCPA 1F6F4DE1, 0032 (r1 IBM TP-70 1290 PTL 1) [ 0.000000] ACPI: APIC 1F6F4E13, 005A (r1 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI: MCFG 1F6F4E6D, 003E (r1 IBM TP-70 1290 IBM 1) [ 0.000000] ACPI: BOOT 1F6F4FD8, 0028 (r1 IBM TP-70 1290 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) [ 0.000000] Built 1 zonelists. Total pages: 127731 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 798.017 MHz processor. [ 10.146942] Console: colour VGA+ 80x25 [ 10.147190] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.147563] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 10.172593] Memory: 498828k/514944k available (2015k kernel code, 15612k reserved, 916k data, 364k init, 0k highmem) [ 10.172612] virtual kernel memory layout: [ 10.172615] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 10.172618] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.172621] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 10.172623] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) [ 10.172626] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 10.172629] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 10.172632] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 10.172639] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.172706] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 10.252729] Calibrating delay using timer specific routine.. 1598.06 BogoMIPS (lpj=3196129) [ 10.252770] Security Framework v1.0.0 initialized [ 10.252781] SELinux: Disabled at boot. [ 10.252807] Mount-cache hash table entries: 512 [ 10.253020] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 10.253043] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.253049] CPU: L2 cache: 2048K [ 10.253054] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 10.253071] Compat vDSO mapped to ffffe000. [ 10.253090] Checking 'hlt' instruction... OK. [ 10.268918] SMP alternatives: switching to UP code [ 10.269223] Freeing SMP alternatives: 11k freed [ 10.269715] Early unpacking initramfs... done [ 11.014025] ACPI: Core revision 20070126 [ 11.014242] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.036794] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 11.036835] Total of 1 processors activated (1598.06 BogoMIPS). [ 11.037029] ENABLING IO-APIC IRQs [ 11.037256] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.184705] Brought up 1 CPUs [ 11.184882] Booting paravirtualized kernel on bare hardware [ 11.184970] Time: 10:39:22 Date: 10/17/107 [ 11.185004] NET: Registered protocol family 16 [ 11.185129] EISA bus registered [ 11.185147] ACPI: bus type pci registered [ 11.185325] PCI: PCI BIOS revision 2.10 entry at 0xfd8d9, last bus=7 [ 11.185329] PCI: Using configuration type 1 [ 11.185334] Setting up standard PCI resources [ 11.191702] ACPI: EC: Found ECDT [ 11.208467] ACPI: Interpreter enabled [ 11.208473] ACPI: (supports S0 S3 S4 S5) [ 11.208506] ACPI: Using IOAPIC for interrupt routing [ 11.224551] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 11.224638] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.224655] PCI: Probing PCI hardware (bus 00) [ 11.225523] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 11.225531] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 11.226272] PCI: Transparent bridge - 0000:00:1e.0 [ 11.226436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.226801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 11.227076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 11.227355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 11.234588] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 11.235032] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 11.235471] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 11.235909] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 11.236346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 11.236826] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 11.237265] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 11.237703] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 11.238225] ACPI: Power Resource [PUBS] (on) [ 11.238252] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.238269] pnp: PnP ACPI init [ 11.238282] ACPI: bus type pnp registered [ 11.245702] pnp: PnP ACPI: found 14 devices [ 11.245707] ACPI: ACPI bus type pnp unregistered [ 11.245713] PnPBIOS: Disabled by ACPI PNP [ 11.245791] PCI: Using ACPI for IRQ routing [ 11.245797] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.265524] NET: Registered protocol family 8 [ 11.265529] NET: Registered protocol family 20 [ 11.265614] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 11.265621] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 11.265627] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 11.265633] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 11.265645] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 11.265653] pnp: 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved [ 11.265660] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 11.265667] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 11.268645] Time: tsc clocksource has been installed. [ 11.296202] PCI: Bridge: 0000:00:1c.0 [ 11.296205] IO window: disabled. [ 11.296214] MEM window: 90100000-901fffff [ 11.296221] PREFETCH window: disabled. [ 11.296229] PCI: Bridge: 0000:00:1c.2 [ 11.296234] IO window: 3000-3fff [ 11.296243] MEM window: 90200000-902fffff [ 11.296250] PREFETCH window: c0000000-c00fffff [ 11.296262] PCI: Bus 5, cardbus bridge: 0000:04:00.0 [ 11.296267] IO window: 00004000-000040ff [ 11.296275] IO window: 00004400-000044ff [ 11.296283] PREFETCH window: c8000000-cbffffff [ 11.296292] MEM window: 94000000-97ffffff [ 11.296299] PCI: Bridge: 0000:00:1e.0 [ 11.296305] IO window: 4000-7fff [ 11.296313] MEM window: 90300000-9fffffff [ 11.296321] PREFETCH window: c8000000-cfffffff [ 11.296356] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 11.296367] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.296396] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 17 [ 11.296406] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 11.296423] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.296446] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 11.296471] NET: Registered protocol family 2 [ 11.332684] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 11.332740] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 11.333023] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 11.333220] TCP: Hash tables configured (established 16384 bind 16384) [ 11.333225] TCP reno registered [ 11.344843] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 12.052674] it is [ 12.802944] Freeing initrd memory: 7305k freed [ 12.803119] Simple Boot Flag at 0x35 set to 0x1 [ 12.803515] audit: initializing netlink socket (disabled) [ 12.803537] audit(1195295963.480:1): initialized [ 12.807223] VFS: Disk quotas dquot_6.5.1 [ 12.807314] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.807472] io scheduler noop registered [ 12.807477] io scheduler anticipatory registered [ 12.807482] io scheduler deadline registered [ 12.807511] io scheduler cfq registered (default) [ 12.807532] Boot video device is 0000:00:02.0 [ 12.807764] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.807827] assign_interrupt_mode Found MSI capability [ 12.807834] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.807893] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.808033] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.808095] assign_interrupt_mode Found MSI capability [ 12.808100] Allocate Port Service[0000:00:1c.2:pcie00] [ 12.808156] Allocate Port Service[0000:00:1c.2:pcie02] [ 12.808406] isapnp: Scanning for PnP cards... [ 13.163145] isapnp: No Plug & Play device found [ 13.204754] Real Time Clock Driver v1.12ac [ 13.204938] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.206800] pnp: Device 00:0a activated. [ 13.207020] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 13.207373] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 [ 13.207387] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 13.208384] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.208723] input: Macintosh mouse button emulation as /class/input/input0 [ 13.208870] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 13.215244] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.215252] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 13.215522] mice: PS/2 mouse device common for all mice [ 13.215702] EISA: Probing bus 0 at eisa.0 [ 13.215713] Cannot allocate resource for EISA slot 1 [ 13.215719] Cannot allocate resource for EISA slot 2 [ 13.215723] Cannot allocate resource for EISA slot 3 [ 13.215728] Cannot allocate resource for EISA slot 4 [ 13.215733] Cannot allocate resource for EISA slot 5 [ 13.215738] Cannot allocate resource for EISA slot 6 [ 13.215742] Cannot allocate resource for EISA slot 7 [ 13.215752] EISA: Detected 0 cards. [ 13.215909] TCP cubic registered [ 13.215933] NET: Registered protocol family 1 [ 13.215970] Using IPI No-Shortcut mode [ 13.216255] Magic number: 15:499:679 [ 13.216688] Freeing unused kernel memory: 364k freed [ 13.248275] input: AT Translated Set 2 keyboard as /class/input/input1 [ 14.589843] AppArmor: AppArmor initialized<5>audit(1195295964.980:2): type=1505 info="AppArmor initialized" pid=1204 [ 14.605518] fuse init (API version 7.8) [ 14.615457] Failure registering capabilities with primary security module. [ 14.640435] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 14.640447] ACPI: Processor [CPU] (supports 8 throttling states) [ 14.643299] ACPI: Thermal Zone [THM0] (27 C) [ 15.460353] usbcore: registered new interface driver usbfs [ 15.460392] usbcore: registered new interface driver hub [ 15.460433] usbcore: registered new device driver usb [ 15.461916] USB Universal Host Controller Interface driver v3.0 [ 15.461998] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 15.462014] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 15.462022] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.462245] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 15.462286] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820 [ 15.462473] usb usb1: configuration #1 chosen from 1 choice [ 15.462526] hub 1-0:1.0: USB hub found [ 15.462536] hub 1-0:1.0: 2 ports detected [ 15.563963] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 20 [ 15.563982] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 15.563989] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 15.564036] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 15.564075] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 15.564241] usb usb2: configuration #1 chosen from 1 choice [ 15.564291] hub 2-0:1.0: USB hub found [ 15.564301] hub 2-0:1.0: 2 ports detected [ 15.667980] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 15.667999] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 15.668007] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.668048] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 15.668088] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 [ 15.668256] usb usb3: configuration #1 chosen from 1 choice [ 15.668312] hub 3-0:1.0: USB hub found [ 15.668322] hub 3-0:1.0: 2 ports detected [ 15.700103] SCSI subsystem initialized [ 15.711486] libata version 2.21 loaded. [ 15.771929] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 22 [ 15.771948] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 15.771955] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 15.772003] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 15.772042] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880 [ 15.772211] usb usb4: configuration #1 chosen from 1 choice [ 15.772259] hub 4-0:1.0: USB hub found [ 15.772269] hub 4-0:1.0: 2 ports detected [ 15.876143] tg3.c:v3.77 (May 31, 2007) [ 15.876174] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 15.876193] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 15.919882] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:b4:1c:b0 [ 15.919897] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 15.919903] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 15.920502] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 22 [ 15.920520] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.920527] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.920574] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 15.920622] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.920632] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.920645] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x90040000 [ 15.991320] Floppy drive(s): fd0 is 1.44M [ 16.027707] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 16.027729] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.027916] usb usb5: configuration #1 chosen from 1 choice [ 16.027967] hub 5-0:1.0: USB hub found [ 16.027978] hub 5-0:1.0: 8 ports detected [ 16.091100] FDC 0 is a National Semiconductor PC87306 [ 16.136994] ahci 0000:00:1f.2: version 2.2 [ 16.137032] ahci: probe of 0000:00:1f.2 failed with error -22 [ 16.142150] ata_piix 0000:00:1f.2: version 2.11 [ 16.142159] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 5.960000] Marking TSC unstable due to: possible TSC halt in C2. [ 5.964000] Time: acpi_pm clocksource has been installed. [ 6.008000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 6.008000] scsi0 : ata_piix [ 6.008000] scsi1 : ata_piix [ 6.008000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 6.008000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 6.172000] ata1.00: ATA-7: HITACHI HTS541640J9AT00, SB1IA73H, max UDMA/100 [ 6.172000] ata1.00: 78140160 sectors, multi 16: LBA [ 6.172000] ata1.00: applying bridge limits [ 6.188000] ata1.00: configured for UDMA/100 [ 6.508000] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0201, max UDMA/33 [ 6.652000] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 6.680000] ata2.00: configured for UDMA/33 [ 6.680000] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54164 SB1I PQ: 0 ANSI: 5 [ 6.684000] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0201 PQ: 0 ANSI: 5 [ 6.708000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 6.708000] sd 0:0:0:0: [sda] Write Protect is off [ 6.708000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.708000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.708000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 6.708000] sd 0:0:0:0: [sda] Write Protect is off [ 6.708000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.708000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.708000] sda:<6>usb 3-1: configuration #1 chosen from 1 choice [ 7.060000] usb 3-2: new full speed USB device using uhci_hcd and address 4 [ 7.116000] sda1 sda2 [ 7.116000] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.124000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.124000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.148000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 7.148000] Uniform CD-ROM driver Revision: 3.20 [ 7.148000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.236000] usb 3-2: configuration #1 chosen from 1 choice [ 20.176000] end_request: I/O error, dev fd0, sector 0 [ 33.232000] end_request: I/O error, dev fd0, sector 0 [ 33.232000] Buffer I/O error on device fd0, logical block 0 [ 46.284000] end_request: I/O error, dev fd0, sector 0 [ 46.284000] Buffer I/O error on device fd0, logical block 0 [ 60.364000] end_request: I/O error, dev fd0, sector 0 [ 73.424000] end_request: I/O error, dev fd0, sector 0 [ 73.424000] Buffer I/O error on device fd0, logical block 0 [ 86.488000] end_request: I/O error, dev fd0, sector 0 [ 86.488000] Buffer I/O error on device fd0, logical block 0 [ 90.056000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 90.124000] ISO 9660 Extensions: RRIP_1991A [ 90.436000] Registering unionfs 1.4 [ 90.436000] unionfs: debugging is not enabled [ 90.460000] loop: module loaded [ 90.696000] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 178.680000] Linux agpgart interface v0.102 (c) Dave Jones [ 178.860000] agpgart: Detected an Intel 915GM Chipset. [ 178.860000] agpgart: Detected 7932K stolen memory. [ 178.876000] agpgart: AGP aperture is 256M @ 0xb0000000 [ 178.948000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 178.988000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 180.736000] input: PC Speaker as /class/input/input2 [ 180.756000] parport_pc 00:0b: reported by Plug and Play ACPI [ 180.756000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 180.876000] irda_init() [ 180.876000] NET: Registered protocol family 23 [ 180.968000] pnp: Device 00:0c activated. [ 180.968000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 180.968000] nsc-ircc, chip->init [ 180.968000] nsc-ircc, Found chip at base=0x02e [ 180.968000] nsc-ircc, driver loaded (Dag Brattli) [ 180.972000] IrDA: Registered device irda0 [ 180.972000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 181.808000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 181.808000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 181.840000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 182.004000] iTCO_vendor_support: vendor-support=0 [ 182.004000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 182.004000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 182.004000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 182.068000] intel_rng: FWH not detected [ 183.284000] ieee80211_crypt: registered algorithm 'NULL' [ 183.288000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 183.288000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 183.412000] Yenta: CardBus bridge found at 0000:04:00.0 [1014:0528] [ 183.412000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 183.412000] Yenta: Routing CardBus interrupts to PCI [ 183.412000] Yenta TI: socket 0000:04:00.0, mfunc 0x01d21002, devctl 0x64 [ 183.488000] Bluetooth: Core ver 2.11 [ 183.488000] NET: Registered protocol family 31 [ 183.488000] Bluetooth: HCI device and connection manager initialized [ 183.488000] Bluetooth: HCI socket layer initialized [ 183.496000] Bluetooth: HCI USB driver ver 2.9 [ 183.496000] usbcore: registered new interface driver hci_usb [ 183.680000] Yenta: ISA IRQ mask 0x0c30, PCI irq 18 [ 183.680000] Socket status: 30000007 [ 183.680000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff [ 183.680000] cs: IO port probe 0x4000-0x7fff: clean. [ 183.684000] pcmcia: parent PCI bridge Memory window: 0x90300000 - 0x9fffffff [ 183.684000] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff [ 183.748000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 183.748000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 183.748000] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 183.748000] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 184.540000] cs: IO port probe 0x100-0x3af: clean. [ 184.544000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 184.544000] cs: IO port probe 0x820-0x8ff: clean. [ 184.544000] cs: IO port probe 0xc00-0xcf7: clean. [ 184.544000] cs: IO port probe 0xa00-0xaff: clean. [ 184.936000] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) [ 184.940000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 17 [ 184.940000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 186.088000] intel8x0_measure_ac97_clock: measured 55134 usecs [ 186.088000] intel8x0: clocking to 48000 [ 186.656000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 186.848000] input: TPPS/2 IBM TrackPoint as /class/input/input4 [ 191.836000] ACPI: AC Adapter [AC] (off-line) [ 191.940000] ACPI: Battery Slot [BAT0] (battery present) [ 192.016000] ACPI: ACPI Dock Station Driver [ 192.020000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 192.020000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 192.020000] ACPI: Error installing bay notify handler [ 192.020000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 192.112000] input: Power Button (FF) as /class/input/input5 [ 192.112000] ACPI: Power Button (FF) [PWRF] [ 192.136000] input: Lid Switch as /class/input/input6 [ 192.136000] ACPI: Lid Switch [LID] [ 192.148000] input: Sleep Button (CM) as /class/input/input7 [ 192.148000] ACPI: Sleep Button (CM) [SLPB] [ 192.592000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 194.004000] Clocksource tsc unstable (delta = 618732002 ns) [ 197.952000] PM: Writing back config space on device 0000:02:00.0 at offset c (was 38820000, writing 0) [ 198.244000] lp0: using parport0 (interrupt-driven). [ 198.356000] ppdev: user-space parallel port driver [ 200.452000] IBM machine detected. Enabling interrupts during APM calls. [ 200.452000] apm: BIOS not found. [ 201.084000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 201.084000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 201.084000] thinkpad_acpi: ThinkPad EC firmware 70HT26WW-1.03 [ 201.088000] thinkpad_acpi: another device driver is already handling bay events [ 201.088000] thinkpad_acpi: disabling subdriver bay [ 201.092000] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode [ 201.168000] Failure registering capabilities with primary security module. [ 202.092000] Bluetooth: L2CAP ver 2.8 [ 202.092000] Bluetooth: L2CAP socket layer initialized [ 202.400000] Bluetooth: RFCOMM socket layer initialized [ 202.400000] Bluetooth: RFCOMM TTY layer initialized [ 202.400000] Bluetooth: RFCOMM ver 1.8 [ 210.960000] [drm] Initialized drm 1.1.0 20060810 [ 211.004000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 211.008000] [drm] Initialized i915 1.6.0 20060119 on minor 0